Discount Flowmaster 942041 40 Delta Flow Muffler - 2.00 Offset IN / 2.00 Center OUT - Aggressive Sound

Buy Flowmaster 942041 40 Delta Flow Muffler - 2.00 Offset IN / 2.00 Center OUT - Aggressive Sound

Flowmaster 942041 40 Delta Flow Muffler - 2.00 Offset IN / 2.00 Center OUT - Aggressive Sound Product Description:

• Durable fully welded 16 gauge alumInized steel
• Reduced Interior resonance
• Excellent street, strip and off road application
• No Internal packIng to blowOut
• Race proven patented delta flow technology

Product Description

This two chamber design Incorporates Flowmaster's patented delta flow technology. The delta deflectors generate Increased scavengIng for better performance and reduced Interior sound. Milder exterior tone and reduced Interior resonance over standard 40 Series. Constructed of 16 gauge 409S staInless steel and fully MIG welded for maximum durability.

Customer Reviews

Most helpful customer reviews

4 of 4 people found the following review helpful.
more deep than aggressive
By Low
great part works well but be sure to be ready to bring it to a shop because it doesn't come with anything but the muffler it self "welding will be needed!" but still sounds great and runs perfect

2 of 2 people found the following review helpful.
Very unique sound
By D. Gustus
I bought 2 of these for a 2001 Crown Vic Police Interceptor and it cost me another $69 to have them installed at a local muffler shop. Overall, it was still less than most places were asking for these WITHOUT installation. The 4.6l engine went from a grumble to a deep purr. It's very distinct and not annoying at all.

1 of 1 people found the following review helpful.
super sound
By wimpy
Very nice mufflers, sound is incredible, low but just not too much.Also good service from Amazone, good job guys!

See all 7 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Flowmaster 942040 40 Delta Flow Muffler - 2.00 Center IN / 2.00 Center OUT - Aggressive Sound

Buy Flowmaster 942040 40 Delta Flow Muffler - 2.00 Center IN / 2.00 Center OUT - Aggressive Sound

Flowmaster 942040 40 Delta Flow Muffler - 2.00 Center IN / 2.00 Center OUT - Aggressive Sound Product Description:

• Durable fully welded 16 gauge alumInized steel
• Reduced Interior resonance
• Excellent street, strip and off road application
• No Internal packIng to blowOut
• Race proven patented delta flow technology

Product Description

This two chamber design Incorporates Flowmaster's patented delta flow technology. The delta deflectors generate Increased scavengIng for better performance and reduced Interior sound. Milder exterior tone and reduced Interior resonance over standard 40 Series. Constructed of 16 gauge 409S staInless steel and fully MIG welded for maximum durability.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Awesome
By 1998 Honda civic ex
Installed on my 1998 honda civic ex, has also added an air flow intake, sounds perfect. I would highly recommend this.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Online Flowmaster 15902 Single Tailpipe Kit - 3.00 in. Universal 4-piece pipes only - requires welding

Buy Flowmaster 15902 Single Tailpipe Kit - 3.00 in. Universal 4-piece pipes only - requires welding

Flowmaster 15902 Single Tailpipe Kit - 3.00 in. Universal 4-piece pipes only - requires welding Product Description:

• Mandrel bent 16ga aluminized tubing
• Recommended for single exhaust systems
• Designed for 90 percent of all trucks/vans/SUVs
• Slip fit connectors for easy assembly
• Does not include hardware

Product Description

Designed for use on most trucks, vans and SUV's. Incorporates 4 mandrel bends with a total 12 feet of aluminized tubing and deep slip fit connections. Aligns for left, right or rear exit style routing (Use two kits for dual exhaust applications). Available in various sizes.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Perfect
By A. Wilson
This was exactly what we needed and expected. It's a universal so small modifications were necessary but we expected that. Shipped quickly and arrived in good shape.

1 of 1 people found the following review helpful.
Complete kit
By D. Sauer
This is a nice kit. There is plenty of extra pipe - way more than you'll need to clear the rear end in most anything. The joints are nice slip-fits so you have room to play if you accidentally cut an inch more than intended or something, and the lap joints are easier to weld up, IMHO. The bends are nice, and it's all generally the quality level you'd expect from Flowmaster. The pieces all have slightly different angles, so its easy to figure out where they go. You get muffler to rearend, over rear end, straighten back out, and about 45 degree out the side pieces. If you want to go straight out the back, you just cut the angle off of the 45 piece, or add your own straight pipe (depending on how far you need to go). Most vehicles - trucks included - will reach past the bumper with the pipe included in the kit and a reasonable length stainless tip. You'll probably have enough extra pipe left over from cutting the other pieces that you can piece together enough pipe to reach the back either way.Do expect the box to be beat up when you get it, but even UPS would have to work hard to damage exhaust pipes... :)I'd definitely use this kit again on another truck (it was installed on an '85 Chevy long bed).

0 of 0 people found the following review helpful.
Good for the price
By ThatGuy
I hacked this up to do a 3" "cat forward" for my turbo volvo. It's cheap, has a couple different kinds of bends and welded nicely. The slip fits are also a plus.

See all 5 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Affordable Flowmaster 15901 16-Gauge Aluminized Steel Universal Tailpipe Kit with 2.50" Mandrel Bent Tubing - 4 Piece

Buy Flowmaster 15901 16-Gauge Aluminized Steel Universal Tailpipe Kit with 2.50" Mandrel Bent Tubing - 4 Piece

Flowmaster 15901 16-Gauge Aluminized Steel Universal Tailpipe Kit with 2.50" Mandrel Bent Tubing - 4 Piece Product Description:

• Mandrel bent 16ga aluminized tubing
• Recommended for single exhaust systems
• Designed for 90 percent of all trucks/vans/SUVs
• Slip fit connectors for easy assembly
• Does not include hardware

Product Description

Designed for use on most trucks, vans and SUV's. Incorporates 4 mandrel bends with a total 12 feet of aluminized tubing and deep slip fit connections. Aligns for left, right or rear exit style routing (Use two kits for dual exhaust applications). Available in various sizes.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Perfect for custom tail pipes
By Bloose
I used this to make a tail pipe for a V8 transplant into my 1998 Cherokee. It worked out really nice and is much better than the stock pipe in a few ways. First, the bends are mandrel bends with no kinks. That makes for much better flow. Second, it is 2.5" of course and the only pre-bent tail pipes for my Jeep were 2.25. Third, I was able to route it much nicer than even the factory bent pipe. One last thing is that is was cheaper than having one bent at the local muffler shop. Also, doing it myself I was able to make it fit exactly how I wanted it to fit.If your looking to make your own tail pipes these are just what you need.B

1 of 2 people found the following review helpful.
Good fit
By P.T.G.
This pipe worked great on my 95 f150. I mounted it behind a flowmaster muffler. It's not an exact fit. If you have the know-how and the correct tools for cutting/fitting exhaust pipe, this is a good choice.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Discounted Flowmaster 15926 Exhaust S-Bend Assortment - 2.50 in. Tubing Various Offsets - set of 6

Buy Flowmaster 15926 Exhaust S-Bend Assortment - 2.50 in. Tubing Various Offsets - set of 6

Flowmaster 15926 Exhaust S-Bend Assortment - 2.50 in. Tubing Various Offsets - set of 6 Product Description:

• Mandrel bent 16ga aluminized tubing
• 2.50 inch tubing and 36 inch length
• Great for exhaust system fabrication
• Includes 2 each of 4.00 in 6.00in 8.00in offsets

Product Description

Mandrel bent S-shape pipes developed to simplify the routing and fabrication of exhaust pipes from headers to muffler. Deep slip fit on single end of pipe(s). Available in various sizes.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
enough for true dual.
By Donald
was enough pipe to do a true dual setup to dump out just before the rear tires which was my goal.Would not be enough go to the rear of a longbed pickup would need addition straight pipe for that.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buying Flowmaster 15904 2.50" Mandrel S-Bend Exhaust Pipe - 6 Piece

Buy Flowmaster 15904 2.50" Mandrel S-Bend Exhaust Pipe - 6 Piece

Flowmaster 15904 2.50" Mandrel S-Bend Exhaust Pipe - 6 Piece Product Description:

• Mandrel bent 16ga aluminized tubing
• 2.50 inch tubing and 36 inch length
• Great for exhaust system fabrication
• Includes 6 each of 4.00 inch offsets
• Mandrel bent tubing

Product Description

Mandrel bent S-shape pipes developed to simplify the routing and fabrication of exhaust pipes from headers to muffler. Deep slip fit on single end of pipe(s). Available in various sizes.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Flowmaster 15904 2.50"
By W. Gummo
These worked out great for exhaust on my 1948 Ford F-1 with 302 V-8.Very heavy wall pipe and should out last me.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices for Deflecta-Shield 8224 Challenger Series Brite Specialty UnderBed Storage Box

Buy Deflecta-Shield 8224 Challenger Series Brite Specialty UnderBed Storage Box

Deflecta-Shield 8224 Challenger Series Brite Specialty UnderBed Storage Box Product Description:

• Deep molded tool tray provides storage for small items and sits above the ledge, allowing for maximum space inside the box
• Rubber floor mat keeps items in your box from shifting and sliding
• Extra thick high grade diamond plate body will not rust, put or peel
• 3-piece box construction with fully welded seams provide extra strength
• Heavy duty J-bolt mounting hardware means no truck bed drilling for most installations

Product Description

From the budget-minded to professional grade, each Deflecta-Shield aluminum storage box is designed to keep tools and other equipment safe and secure. Available in diamond plated, black or polished finishes and in a wide variety of sizes and styles. Deflecta-Shield provides lasting quality and dependability for when the day is done and the last tool is put away.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Deceptive Description
By snakeyes
The ad claimed there was a tool tray and a liner in these boxes!!! Not so! I ordered 2 of them. Shipped from two different suppliers for some odd reason so one came a week later then the other. Weather striping around door leaves a bit to desire. Overall a nice box though. well worth the $136 I paid.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!