Compare Prices for Edelbrock 8810 Victor Series Mechanical Water Pump

Buy Edelbrock 8810 Victor Series Mechanical Water Pump

Edelbrock 8810 Victor Series Mechanical Water Pump Product Description:

• Curved vanes produce greater flow with less cavitation
• 5/8 pilot shaft short style water pump
• Provides maximum cooling for the street and the racetrack
• Ideal to prevent overheating in street rods and street machines
• Includes heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, and leak-proof seals

Product Description

The Edelbrock Victor Series Mechanical Water Pump provides maximum cooling for the street and the racetrack. They are ideal in preventing overheating in street rods and street machines, as well as in tow rigs and motor homes. This water pump has 3/4 inch ball/ball bearing and is 0.625 inch diameter. The dimension from block surface to hub is 5-5/8 and its inlet diameter is 1.80. It has curved vanes that produces greater flow with less cavitation. This aluminum pump has CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined, cast iron impellers are larger than other impellers. This water pump will clear composite timing covers on late model GM performance crate engines.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Edelbrock 8810 Victor Series Mechanical Water Pump
By RagenRat
Edelbrock 8810 Victor Series Mechanical Water PumpI've owned many a water pump and this one has my jaw dropped :00This is so fine with it's machined surfaces and 3/16" thick back plate. Completely rebuild-able.You let the pictures tell the story.Enjoy, buy with confidence.RagenRat

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Best Edelbrock 6593 Air/Fuel Ratio Gauge

Buy Edelbrock 6593 Air/Fuel Ratio Gauge

Edelbrock 6593 Air/Fuel Ratio Gauge Product Description:

• Helps to improve ignition spark advance curves
• Used as a tuning tool
• Consists of an oxygen sensor and a calibrated electronic display
• Used to guide carburetor adjustment and jetting
• Includes oxygen sensor / bung, harness, display unit and installation instructions

Product Description

The Edelbrock Air / Fuel Ratio Monitor is used to adjust all carburation circuits including idle, cruise and power. The oxygen sensor is installed in the exhaust pipe and the electronic display is connected. When the engine is running, the actual air / fuel ratio is continuously displayed. This monitor directly indicates air / fuel ratios from approximately 12 to 15:1. It works great for RVs or any application where frequent altitude and climate changes are encountered. It is not recommended for use with leaded fuels or alcohol.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
Best value in an AF meter I've found
By Kid_Again
I'm a gear head and have two classic cars with carbs and headers. The headers had bungs welded to them before I had them JetHot coated so I was ready to go when the meter arrived.I modified the box/wires to be easily swapped from one car to another and it works perfectly. With the small block, I have problems at WOT above 3,000 and I pretty much thought it was leaning out. First drive out of the box and I could see that not only was it leaning out, it was REALLY leaning out. Not enough to fry the pistons but I do enjoy keeping my foot in it. So this easily confirmed my suspicions. It's GOOD to have data. Also, the leds are perfectly visible on a sunny day with the top down.I did an awful lot of searching and was astounded at how much AF meters cost. So I was kind of expecting to return it. Quite the opposite. Besides, the other models I saw are data loggers, Bluetooth, remote telemetry, etc. Gimme a break, I'm not doing Formula One here, I just need something a bit more sophisticated than my nose.

1 of 2 people found the following review helpful.
IF YOU HAVE A CARB, YOU NEED THIS!
By petert
Most carbs purchased for the average hot rod are calibrated WAY too rich. This device allows one to effectively adjust/calibrate/modify each circuit of the carb. Most folks are using a Holley, and these are easily modified to allow for the user's intended purpose. Most tuners change the "main" jets, but the vehicle runs mostly on the transition or idle circuits, unless you are only drag racing the car. By using this product, one can monitor the actual fuel usage during each driving situation. Often, the idle circuit and transition circuit needs to be leaned a lot to provide economy for a daily driver (or a part-time racer). Using this product along with the books "How to build horsepower" by David Vizard volume 2 in particular, and "Holley Carburetors" by Dave Emanuel will give you the technical knowledge to modify (perhaps severely!)your Holley. Most muffler shops will drill the required hole, then weld the bung to your exhaust pipe for a small charge. Now go home, install the monitor and start saving gas or reducing your ET's, whichever you prefer.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices Edelbrock 7111 Performer Intake Manifold

Buy Edelbrock 7111 Performer Intake Manifold

Edelbrock 7111 Performer Intake Manifold Product Description:

• Retains good throttle response
• Delivers maximum power with a broad torque curve for high-performance street applications
• Carburetor pad accepts square-bore carburetors without adapters
• Larger plenums and runners to match the free-flowing exhaust
• Intended for high-performance street or competition engines that run from 1,500 to 6,500 RPM

Product Description

The Edelbrock Performer RPM Intake Manifolds have a high-rise, dual-plane layout, with patented runner tuning and a 180 degree firing order. The Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They produce incredible top-end horsepower. They do not compress well when used with an aluminum intake manifold. The factory composition-type embossed gasket also works satisfactorily. They are intended for high-performance street or competition engines that run from 1,500 to 6,500 RPM. The port flange has extra material above the runner for use with cast iron 455 heads. This manifold has provisions to add oil fill tube but no provisions for exhaust heated or stock-style choke.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Edelbrock RPM Intake Manifold
By Rolo
Bought this intake manifold on Amazon...Got it cheaper there than most on-line sources...It's probably the best street/strip manifold...Very satisfied with this intake manifold!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Low Cost Edelbrock 5794 Valve Springs - Set of 16

Buy Edelbrock 5794 Valve Springs - Set of 16

Edelbrock 5794 Valve Springs - Set of 16 Product Description:

• Includes non-rotator valve springs, retainers and matching valve stem locks
• Inside diameter of the inner and outer spring is 0.880
• Outside diameter of the outer spring is 1.265
• Valve spring style is standard and number of springs per valve is single
• Retainer and lock is made of steel for maximum strength

Product Description

The Edelbrock Sure Seat Valve Spring Kit features non-rotator valve springs, retainers and matching valve stem locks. The valve spring retainers are made of superior quality steel, machined and heat-treated for strength. These retainers have a black-oxide finish for rust and corrosion protection. Heat-treated machined (HTM) 7 degree valve stem locks are for use with Edelbrock retainers. Valve stem locks are made of black-oxide, top quality steel for maximum strength.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Edelbrock 5794 Valve Springs - Set of 16
By RagenRat
Edelbrock 5794 Valve Springs - Set of 16Great price on this complete valve spring set-up with retainers and keepers. Great quality from a great company that sells products you can count on. I like doing a job only once and with this product I am guaranteed I will get a quality outcome.Buy with confidenceRagenRat

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Cheapest Edelbrock 4160 Classic Aluminum Finned Valve Cover

Buy Edelbrock 4160 Classic Aluminum Finned Valve Cover

Edelbrock 4160 Classic Aluminum Finned Valve Cover Product Description:

• Constructed from heavy-gauge, sand cast aluminum
• Measures 3-3/4 inch height
• Ensures long lasting durability
• Comes with a polished finish

Product Description

Edelbrock Classic Aluminum Finned Valve Covers are made from heavy-gauge, sand cast aluminum with a polished finish. These covers are tall enough to clear roller rockers and have a timeless ridged design. These covers measure 3-3/4 inch height and ensure long lasting durability.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
The best vintage valve covers around for a SBF
By Charlie Foxtrot
These puppies are beautiful cast and polished aluminum, they have bosses in the top underside for a breather and baffle attachments and they come with baffles. But you have to do some machining work to install either; they aren't drilled and tapped for the baffles. This is nice though, perfect VCs for a side mount breather and a hidden PCV hole.There are some minor casting imperfections in the polished areas, but compared to other cast and polished aluminum pieces these are minor imperfections; these are really top notch.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Compare Edelbrock 4145 Elite Series Classic Finned Aluminum Valve Cover

Buy Edelbrock 4145 Elite Series Classic Finned Aluminum Valve Cover

Edelbrock 4145 Elite Series Classic Finned Aluminum Valve Cover Product Description:

• Made of heavy-gauge, sand-cast aluminum
• Has enough height to clear roller rockers
• Height of the cover from base to top is 3-1/2 inch
• Valve cover comes with the Edelbrock logo
• Mounting style of the cover is perimeter bolt

Product Description

The Edelbrock Elite Series Classic Finned Aluminum Valve Cover is made of heavy-gauge, sand-cast aluminum. They have enough height to clear roller rockers. The valve cover can be removed to adjust the valves. Breathers #4201 or #4211 can be added, if desired. The height of the cover from base to top at the highest point is 3-1/2 inch. The Edelbrock classic valve covers can be machined to accept breathers if desired.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Edelbrock 4145 Elite Series Classic Finned Aluminum Valve Cover
By James M Kelley
These are beautiful and fit great. Only problem is for my 65 Nova they won't work with the AC compressor not the alternator.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices Edelbrock 2111 Performer Intake Manifold

Buy Edelbrock 2111 Performer Intake Manifold

Edelbrock 2111 Performer Intake Manifold Product Description:

• Basic operating RPM is from idle to 5,500 RPM
• Intake is made of aluminum material with a natural finish
• Intake style is dual plane and carburetor quantity is single
• Performer is a 90 degree V6 and non-EGR (Electronic Gas Recirculation)
• Intake is 50-state street legal, when used with the correct carburetor and in the correct application

Product Description

The Edelbrock Performer Intake Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This patented design greatly improves torque over a wide RPM range for excellent throttle response, especially off-idle through the mid-range. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port. The Performers are ideal for passenger cars, trucks and RVs. This dual bolt pattern waterneck fits both automotive and marine applications.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Excellent product
By Justin Persinger
Looks great and performs great too! It was everything that I expected in this product. I will recommend this to others!

0 of 0 people found the following review helpful.
Edelbrock Performer Intake Manifold 2111
By C M METCALF
I bought this manifold to do a 4bbl conversion on a Mercruiser 4.3L (Chevy V-6) 2bbl (175hp) marine engine. The water outlet is drilled and tapped for both marine and automotive applications. My research shows that folks believe the power is substantially increased (18-50hp) and fuel consumption is lower when used with the Weber or Edelbrock 1409 marine carburetor (600cfm). The quality and finish is excellent and Edelbrock offers all of the accompanying parts for it such as a stud kit for the carburetor flange (8008), flange gasket (7209), etc. All in all very pleased with this part and I'm sure it'll deliver the additional power and fuel economy that others have reported.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!