Low Cost Auto Meter 2614 Z-Series 2'' Boost Gauge

Buy Auto Meter 2614 Z-Series 2'' Boost Gauge

Auto Meter 2614 Z-Series 2'' Boost Gauge Product Description:

• Reads from 0-30'' Hg / 0-30 PSI
• Gauge diameter is 2-1/16''
• Includes red and green colored light bulb covers
• Clean and simple line with a bold
• Stylish, subtle with an all black design for a factory look and are ideal for any application

Product Description

Auto Meter Z-Series 2'' Boost Gauges are stylish, subtle with an all black design for a factory look. These gauges are ideal for any application. The Auto Meter Z-series fuel pressure gauge reads from 0-30'' Hg / 0-30 PSI. The diameter of the mechanical gauge is 2-1/16''. The Z-series gauges carry-on the high performance look in an understated way. It is a clean, simple line with a bold, easy-to-read face that looks right at home in everything from dailey drivers to big-dollar street rods and race cars. The gauges have fluorescent red pointers and are available in a complete line of mechanical and electrical styles. It can be mounted in optional panels, gauge pods or mounting cups. It includes 12-volt lighting, red and green colored light bulb covers and all necessary mounting hardware. It includes 1/8" and 1/4" NPT Fittings along with 6 feet nylon tubings.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Picture and description do not match actual product.
By Anthony Fowee
This is an accurate gauge that does its job.The image and description on this page do not match the actual product. The image shows(part#2617) a 60lb. gauge with no vacuum reference. The description says this item is a fuel pressure gauge, it is not. It measures manifold pressure.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Best Reviews of Auto Meter 2432 Traditional Chrome 2-1/16" Mechanical Water Temperature Gauge with 6' Tubing

Buy Auto Meter 2432 Traditional Chrome 2-1/16" Mechanical Water Temperature Gauge with 6' Tubing

Auto Meter 2432 Traditional Chrome 2-1/16" Mechanical Water Temperature Gauge with 6' Tubing Product Description:

• Bronze bourdon tube 270 degree sweep movements and durable nylon gearing make rugged and long lasting gauges a proven high performance favorite for over 25 years
• Require no electrical power for operation and ranges 120-240 degree fahrenheit
• Ideal choice for vehicles with no or low powered electrical systems
• Includes 6 feet tubing
• Includes 1/2 inch NPT adapter/fitting

Product Description

Auto Meter Traditional Chrome 2-1/16 inch (52.4 millimeter) Mechanical Water Temperature Gauge with 6 feet Tubing (ranges 120-240 degree fahrenheit) features bronze bourdon tube 270 degree sweep movements and durable nylon gearing have made these rugged and long lasting gauges a proven high performance favorite for over 25 years. These mechanical gauges require no electrical power for operation making them an ideal choice for vehicles with no or low powered electrical systems. Includes 6 feet tubing. Includes 1/2 inch NPT adapter/fitting.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Great gauge
By Mike D. Thomas
Best gauges with that classic look, you can't go wrong... This is my third set in my third restoration vehicle..I have had my first set installed for about 10 years, no problems

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices Auto Meter 2499 Traditional Chrome 3-3/8" 8000 RPM In-Dash Tachometer

Buy Auto Meter 2499 Traditional Chrome 3-3/8" 8000 RPM In-Dash Tachometer

Auto Meter 2499 Traditional Chrome 3-3/8" 8000 RPM In-Dash Tachometer Product Description:

• Famous high performance movements Designed with seamless dashboard mount
• Resettable trip odometer
• Available in a variety of configurations and sizes to accommodate diverse applications Resettable Trip odometer Will work with most factory sensors
• Operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12 volt high performance racing ignitions
• Designed with seamless dashboard mount in mind for the ultimate driver information center

Product Description

Auto Meter Traditional Chrome 3-3/8 inch (85.7 millimeter) 8000 RPM In-Dash Tachometer Gauge features famous high performance movements designed with a seamless dashboard mount in mind for the ultimate driver information center. When you’re ready to put the best instrumentation available in your vehicle, don’t settle for slow and inaccurate factory equipment. Available in a variety of configurations and sizes to accommodate diverse applications. Operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12 volt high performance racing ignitions.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
A High Quality Automotive Instrument
By PR2000
This is a very high quality instrument with a cool retro look. This is the finest electric tachometer I've ever installed. Somewhat expensive but worth the price.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buying Auto Meter 2391 1-1/2" Short Sweep Electric Three-Gauge Console

Buy Auto Meter 2391 1-1/2" Short Sweep Electric Three-Gauge Console

Auto Meter 2391 1-1/2" Short Sweep Electric Three-Gauge Console Product Description:

• Advanced 90 degree air core movements
• Electric sending units keep hazardous fluids in the engine compartment and indicates oil/volt/water
• Sends collected data through an electrical signal to quick reacting, precise air core movements to give you all necessary information
• Includes 1/4 inch, 3/8 inch, and 1/2 inch NPT adapter/fitting
• Simple three wire installation

Product Description

Auto Meter 1-1/2 inch (38.1 millimeter) Short Sweep Electric Three-Gauge Console (Oil/volt/Water) features advanced 90 degree air core movements and simple three wire installation characterize these high performance instruments. Electric sending units keep hazardous fluids in the engine compartment sending collected data through an electrical signal to quick reacting, precise air core movements to give you all the information that you need and nothing that you don’t. Includes 1/4 inch, 3/8 inch and 1/2 inch NPT adapter/fitting.

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
AutoMeter delivers another quality gauge set!
By S. Gussey
Easy to follow instructions make wiring these gauges a snap. It can be time consuming, but not all that difficult. I daisy-chained all three gauges and their lights together to simplify wiring. Start at one gauge with your positive wire, run that to the positive of the next gauge, and finally the third gauge. Once you have all 3 gauges' positive terminals wired together, you can run just 1 wire to a keyed power source. I did the same thing with the grounds, all three gauges' ground terminals are wired together, along with all 3 of the ground leads for the lights - all connect to 1 wire to a good chassis ground.After doing that, there are 2 sensor wires to run under the hood and one wire for the lights. One to the temp sensor and one to the oil pressure sensor. The wire for the lights can be added to the panel lights fuse or any wire that gets power when the park/headlights are on.The panel the gauges come in is a quality piece, however I did not have space to use it. I made a custom panel to fit in the space I had and cut the holes for the gauges. The small 1-1/2" size was perfect for my application.Gauge set comes with all the sensors needed and basic supplies to mount and connect wiring. Does not come with any wires.I have used Autometer/Autogage instruments for over 20 years now and have always found them to be quality products.

0 of 0 people found the following review helpful.
Works, easy to install.
By Mike Mathews
I just didn't like where the bracket holders were located. Other than that, does exactly what you want it too.

0 of 0 people found the following review helpful.
Gauges
By Richard Hoke
Amazon service great as always. I was limited on space so the gauges fit where needed perfectly. Only problem I see so far is the lighting. Very dim, make the gauges hard to see at night. In this age of bright LEDs no reason for this.

See all 6 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Auto Meter 2302 Auto Gage Black 3-3/4" 8000 RPM Shift-Lite Tachometer

Buy Auto Meter 2302 Auto Gage Black 3-3/4" 8000 RPM Shift-Lite Tachometer

Auto Meter 2302 Auto Gage Black 3-3/4" 8000 RPM Shift-Lite Tachometer Product Description:

• Mountable in every conceivable position
• Versatility and durability have made them a race proven favorite for over 30 years
• Offer a variety of performance oriented options from shift lights to memory recall functions
• Trade marked aluminum and rubber shock strap design for the best vibration protection available
• Operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12 volt high performance racing ignitions

Product Description

Auto Meter Auto Gage Black 3-3/4 inch (95.3 millimeter) 8000 RPM Shift-Lite Tachometer are mountable in every conceivable position and the versatility and durability of the pedestal mount tachs have made them a race proven favorite for over 30 years. These tachs offer a variety of performance oriented options from shift lights to memory recall functions, coupled with a trade marked aluminum and rubber shock strap design for the best vibration protection available. Operates on 4, 6, or 8 cylinder engines with points, electronic, and most 12 volt high performance racing ignitions.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Easy to install, good size and visibility
By Customer Review
Got this for my 68 fairlane with an msd ignition. Just powered it and plugged it into the tack output of my ignition box and worked fine. Works great, but I probably should have gotten the similar model without the tach light and saved some money as I haven't yet needed it for my daily commutes.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Cheapest Weiand 17-6

Buy Weiand 17-6

Weiand 17-6 Product Description:

• Allows carburetors to be mounted on manifolds designed for Rochester, Quadrajet, or Carter Thermo-Quad carburetors
• Constructed from cast aluminum
• Open center design
• Measures 0.75" thick
• Includes all necessary hardware

Product Description

This carburetor plate is made of cast aluminum and allows carburetors to be mounted on manifolds designed originally for Rochester, Quadrajet, or Carter Thermo-Quad carburetors. It has an open center design and measures 0.750" thick.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Direct Bolt on to Holley 770CFM Carb
By Khalid Saleh Alaskar
I have an H1 Hummer custom fitted with a 7.4L 454ci Suburban Engine.After a 770cfm Holley Street Avenger and the Holley 17-6 Adaptor Plate...Imagine seeing a 10'000lb Beast jump off the line!5 Stars, direct bolt on part.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Deals for K & N E-3223 High Performance Custom Air Filter

Buy K & N E-3223 High Performance Custom Air Filter

K & N E-3223 High Performance Custom Air Filter Product Description:

• High air flow with excellent filtration
• Designed to increase horsepower and acceleration
• Fits into existing factory air box, no cutting or fitting is required
• Filters are washable and reusable and are backed by K&N's million-mile limited warranty

Product Description

K&N's lifetime replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. K&N's replacement air filter is custom-designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. Simply remove the disposable air filter and replace it with a K&N air filter; no cutting or fitting is required. The filters are washable and reusable and are backed by K&N's million mile limited warranty.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
GTO
By Talleyho
The air filters fit the 3 dueces on my 1965 LeMans perfectly. I was pleasantly suprised to say the least.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!