Buy Vantage Point CGUPM12-S Universal Front Projector Mount - SilverVantage Point CGUPM12-S Universal Front Projector Mount - Silver Product Description:
- Universal LCD/DLP projector mount with 12" drop
- Tilt and yaw (roll) adjustment
- 360-degree rotation
- Individual height adjustment for each mounting arm
Product Description
The Universal Projector Mount sets itself apart from other industrial looking ceiling mounts. Styled from steel and die-cast aluminum, the mounts boast a clean and simple finished appearance when viewing it on the ceiling. The CGUPM06 extends approximately 12 inches from the ceiling, rotates, tilts and swivels in virtually any direction, and is capable of functioning on flat or vaulted ceilings. The Universal Projector Mount is compatible with most of today�s LCD and DLP home theater projectors and is fully adjustable to fit a wide range of projector hole patterns.
Customer Reviews
Most helpful customer reviews
20 of 20 people found the following review helpful.
Very easy to install.
By Cheetokhan
Just got this to mount my new Mitsubishi DH1000U. I needed something that would let me mount my projector to a sloped ceiling, and this worked perfectly. Only took me about 30 minutes to attach this to the projector, mount it on the ceiling, and adjust it. Really easy to install and adjust.This assembly is heavier duty than it appears in the pictures. All the joints are easy to adjust and are locked in place with pre-installed Allen head lock screws. Once the lock screws are tightened, the mount is completely rigid.They even include the Allen wrench in the box. All you need is a drill with a 5/32 bit for the 3 heavy duty screws that hold it to the ceiling joist, and a Phillips screwdriver (I used a driver bit in a cordless drill).The way this is designed, you could use it to mount a projector to a ceiling or to a wall.
13 of 14 people found the following review helpful.
For projectors with 3 mounting holes
By Autodidact
This is a good mount but it is designed for projectors that only need three mounting points. many projectors need 4 mounting points (one in each corner) this will make this mount difficult to us....
9 of 9 people found the following review helpful.Simple and solid
By Jim Westhoff
I bought this to hold my HD1000U and it is working great. The directions are worthless. Putting it together based on the picture on the box was about as good. But it was so simple you really don't need the directions. It was as easy as finding a stub, drilling 3 holes and screw it in. Then mount the projector to the other end and attach the two sides. It will bend any direction you want and the extention bar is only needed if you want the 12 inch drop. I thought I would need it, but was able to install it without it. It looks nice and works great.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
