Buy Jet 708737 DC-CS 2-Micron Canister Filter for 708640 DC-650A Dust CollectorJet 708737 DC-CS 2-Micron Canister Filter for 708640 DC-650A Dust Collector Product Description:
- 2-micron canister filter catches dust 15 times smaller than conventional filters
- Captures particles as small as 2 microns for optimal lung health and cleaner work environment
- Reduces air-resistance to provide a 10-20% more CFM than conventional dust collectors
- Transparent bags make it easy to tell when they are full
- Designed for the 708640 DC-650A dust collector
Product Description
FILTER DUST 15 TIMES SMALLER THAN STANDARD FILTERS! The illustration below shows the relative filtering capability differences between a standard dust collector bag and a JET3 canister filter.The ball on the left represents a 30-micron particle, and the ball on the right represents a 2-micron particle. COMPARE FILTERING SURFACE AREA Most 30- micron filter bags have the following surface area to capture dust. See how JET's canister filters compare: 1-1/2HP Dust Collector Standard Filter Bag (sq. in.) 2,062 JET Canister Filter (sq. in.) 12,052 2HP Dust Collector Standard Filter Bag (sq. in.) 2,323 JET Canister Filtert (sq. in.) 12,052 3HP Dust Collector Standard Filter Bag (sq. in.) 6,656 JET Canister Filter (sq. in.) 24,104
Customer Reviews
Most helpful customer reviews
2 of 2 people found the following review helpful.
Perfect Upgrade to My Older DC-610
By JohnM
I had been looking to upgrade my dust collection system with a higher efficiency cartridge (2 micron) for quite some time. I have been putting it off because my Jet Dust Collector is an older model. It is a DC-610 and I could never find an upgrade kit that indicated that it would support my DC-610. I saw this filter on Amazon and started digging into the specifications. Cross referencing it with the dust collection specifications from various Jet web sites, what I found was that my older Jet DC-610 matched the dimensions (14") and horse power (1hp) of the newer DC-650. The newer Jet DC-610 dimensions were smaller than the unit I had. I called product support for the canister filter and they concurred that it should fit. I decided to order it. When it arrived I removed the upper bag and installed the filter on my older dust collector. The filter fit perfectly. The canister filter came with a foam rubber seal already installed in order to assure an air-tight fit. I did need to add some support to the filter side of the dust collector. I then replaced the bottom bag wiht a clear plastic one. I was happy that I finally had finally upgraded to a 2 micron canister filter on my system. I then turned it on. I could not believe the difference in the increased airflow at each dust collection station. I was expecting some difference but not to the degree that I experienced. The March 2008 issue of Wood Magazine has a great article on dust collectors and the efficiencies gained by installing a 2 micron cartridge filter. I am completely satisfied with this purchase and the quality and performance of this filter. It was worth every penny. I just wish I had figured this out sooner.
2 of 2 people found the following review helpful.Expensive, but what a difference!
By Stephen J. Carr
Bought to improve the working conditions in my small basement shop and as an upgrade for my existing, realatively new, 1HP 650cfm collector, adding this filter boosted the performance of the system a great deal. It was as if another 1/2HP was added to the collector.
1 of 1 people found the following review helpful.Dust Dog Cannister Filter JET DC-650
By Pat Mac
I purchased this cannister filter as an "upgrade" for my DC-650. The regular price was $142, but I got it on sale for $112. No tax and no shipping through AMAZON. Can't beat the deal. The running noise level went up slightly, but well worth the obvious additional airflow and lower airborne dust. I recommend this fliter to everyone with a JET DC-650.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
